Sony PMW-F55 Operating Instructions Manual page 94

System
Menu items Sub items and setting values Contents
Switch/Lamp
Rec Lamp
Setting for the
switch/lamp
Lock Switch Setting
Menu Dial Scroll
Menu Dial Direction
Set Key on Thumbnail
Fan Control Setting
Setting the fan
control mode
Battery Alarm
Near End:Info Battery
Setting for the
battery
End:Info Battery
Near End:Sony Battery
End:Sony Battery
Near End:Other Battery
End:Other Battery
Detected Battery
DC Voltage DC Low Voltage1
Alarm
Setting the
DC Low Voltage2
warning of the
input voltage
Language Select
Selecting the
language for
menus and
messages
94 Setup Menu List
On / Off
without Rec Button / with
Rec Button
Normal / Loop
Normal / Reverse
Pause / Play
Auto / Minimum / Off in Rec
5% to 100% (in steps of 5%)
0% to 5%
11.5V to 17V (in steps of 0.1V)
11.0V to 11.5V (in steps of
0.1V)
11.5V to 17V (11.8V) (in steps
of 0.1V)
11.0V to 14V (in steps of 0.1V)
Sony Info Battery / Sony
Battery / Other Battery / DC IN
11.5V to 17.0V
11.0V to 14.0V
English /
Turns the Rec lamp on/off.
Sets whether to include the Rec button on the buttons that are
locked by the LOCK switch.
(When the Rec function is assigned to the assignable button,
the button is treated as the Rec button.)
Selects the scroll method for the menu operation.
Selects the scroll direction for the menu operation.
Sets the behavior when pressing the MENU dial while
selecting a thumbnail.
Sets the fan control mode of the camcorder and AXS recorder
that is connected to the camcorder.
Sets the battery level at which the low battery warning is
generated.
Sets the battery level at which the battery empty warning is
generated.
Sets the battery level at which the low battery warning is
generated.
Sets the battery level at which the battery empty warning is
generated.
Sets the battery level at which the low battery warning is
generated.
Sets the battery level at which the battery empty warning is
generated.
Displays the type of power supply.
Sets the DC IN voltage at which the low input voltage
warning is generated.
Sets the DC IN voltage at which the lack of any input voltage
warning is generated.
Selects the language for menus and messages.