Victoria Arduino ADONIS 3 gruoups Manual page 59

• Going on to another selection or pressing the
ENTER key.
The set coffee key will turn off.
HOT wATER
• Press the button and make sure that it lights
up.
The display will read:
SECONDS
followed by the value already set by the manufac-
turers.
Press the   keys to vary the hot water delivery
time.
• If a new sampling is desired press the
again.
Delivery starts. When the desired dose has been
reached press the button again
• The display will show the new dose value set
which can still be changed by pressing the  
keys.
• Press the ENTER key or go on to a further selec-
tion to terminate the operation.
The button will turn off.
TIMED STEAM
• Press the button and make sure it lights up.
In those models provided with a temperature
probe (optional) the control unit automatically rec-
ognizes the presence of the probe and the display
will read:
button
STEAM. TEMP. °C
followed by the temperature set previously by the
manufacturer.
.
Press the   keys to vary the temperature of
the beverage you want to heat. When the desired
temperature has been reached, the steam delivery
will automatically stop.
• In the standard version (without temperature
probe), on pressing the
read:
STEAM SECONDS
followed by the amount already set by the manu-
facturers.
Press the   keys to vary the steam delivery
time.
• If a new sampling is desired press the
again.
Delivery starts. When the desired dose has been
reached press the button again
the display will
button
.
57 57