Overview Of Controls - Hensel Integra 250 Plus User Manual

User manual // Integra Plus // Compact flash unit
6
Compact flash unit – controls front panel
1
2
3
4
5
6
7
8
9
10 Mains connector (Bi-voltage 110 V and 230 V)
11 FULL: modeling lamp operation mode and ON indicator
12 PROP: modeling lamp operation mode and ON indicator
13 Flash power control switch
14 LED display
Tilting head – components
15 Cable fixation
16 Hole of the umbrella holder
17 Shifting of the tilting head to balance heavy loads
18 Clamping screw to hold umbrellas
19 Star screw for attaching unit to a stand
20 Fixing bracket
Radio transmitter – controls*
21a Flash power down and modeling light options
21b Flash power up button
22 Channel selector for 3 channels / 'All' option (sliding switch)
23 Test button for flash triggering
24 Socket for sync cable, Ø 2.5 mm
25 Locking screw for mounting to the hot shoe of the camera
26 Screw for opening the battery compartment
*: The radio transmitter is not included in the standard delivery and has to
be ordered separately. (Code no. 3950 or 3955)
36

Overview of controls

ON: main switch ON / OFF
RC*: remote control switch and ON indicator
AUDIO: acoustical ready signal and ON indicator
FC: flash check switch and ON indicator
SLAVE: slave switch and ON indicator
TEST: Manual flash release with ready indicator
Sync socket
Slave
Fuse 4 A
HENSEL-VISIT GmbH & Co. KG