General Safety Regulations - Hensel Integra 250 Plus User Manual

User manual // Integra Plus // Compact flash unit
Proper use
Improper use
32
3

General safety regulations

Compact flash systems store electrical energy in
capacitors by applying high voltages. These form a source
of danger, which must be carefully excluded. Besides
general rules on handling electrical appliances, the
following safety measurements must be observed.
Therefore read and comply the safety hints (also see
paragraph Starting up) within the user manual before
turning the appliance on.
The present compact flash unit is meant for studio use of
professional photographers. Its task is to provide electrical
energy for Hensel flash lighting.
The appliance may not be used for any other purpose
than that described above, especially not for other
electrical appliances.
Halogen lamps and flash tubes can burst during
operation. For this reason it is a must to protect
modeling and flash light with the supplied, correctly
installed Hensel protection glass dome. The glass
dome is available in different versions. The use of the
glass dome changes the color temperature.
 Contact with the capacitor voltage is perilous, and
therefore opening of the case of Integra Plus compact
flash units and repairs must only be made by
authorized customer service.
 Integra Plus compact flash units are equipped with a
user-replaceable flash tube. Exchange of flash tube
and modeling lamp must only be performed with the
appliance turned off, unplugged from the mains and
discharged.
 Compact flashes must only be used on supply lines
(mains) with working protective conductor (earth line).
HENSEL-VISIT GmbH & Co. KG