Silvercrest SAB 160 A1 Operating Instructions Manual page 137

Handling and operation
Handling and operation
In this chapter you receive important information for the handling and operation
of the device.
NOTICE
► If no setting is made and/or no button pushed within approx. 5 seconds the
device returns to its previous operating mode. Changed settings are saved.
Switching On and Off
♦ Press briefl y the
notice WELCOME appears.
♦ Briefl y tap the
♦ Briefl y tap the
AUTO DIM: The display illumination will, depending on the lighting conditions,
MAN DIM: The display illumination can be set in two stages (H = High and
♦ To switch off hold down the
Settings
WARNING
Hearing damage as a result of too high a volume!
If the volume is set too high it can lead to permanent hearing damage.
► Set the volume to moderate levels only.
Volume
♦ Turn the multi controller to set the volume.
Switching mute on and off
♦ Press the
♦ To switch the sound on again press the
switching is rescinded when receiving a PTY or TA station.
SAB 160 A1
/DIM button to switch the device on. In the display the
/DIM button. In the display appears AUTO DIM.
/DIM button again. In the display appears MAN DIM.
set automatically.
L = Low) by turning the multi controller.
button to switch the sound off . "MUTE" blinks in the display.
/DIM button longer.
button once more. The mute
GB
MT
135