SAB Goblin black thunder Instruction Manual page 23

Tail Rotor Hub Assembly
Oring
(HC335-S)
Button Head Cap Thrust Bearing
Screw M4x6mm 5x
(HC096-S) (HC435-S)
Note: Smaller ID
Note: Larger ID
Note:
It is a normal for the tail to feel a bit tight after initial
assembly as the tail spindle preload is ussually high when
the helicopter is brand new. The preload will loosen up
after 2-5 flights allowing the system to become smooth.
Tail Pitch Slider Link Assembly
Tail Pitch Slider
Assembly
Socket Head Cap
Screw M2x6mm
(HC004-S)
Spacer
(H0076-S)
eg: Microlube GL261
Spindle Shaft
(H0329-S)
Tail Shaft
(H0325-S)
10x4mm
eg: Microlube
GL261
Bearing
5x 10x4mm
(HC411-S)
Spacer
7.5x 10x0.5mm
(H0349-S)
Socket Head Cap
Screw M2x6mm
(HC004-S)
Note: S >> Left Side
Note: S >> Right Side
2x 3x3mm
Tail Pitch Slider Assembly
Tail Pitch Slider 03
[H0054]
Tail Blade Grip
Bearing
(H0327BM-S)
(HC411-S)
Spacer
(H0330-S)
Uniball
M2.5x 5H6
(H0064-S)
Tail Pitch Slider Link
(H0261-S)
Chapter 12, Tail System
Tail Pitch Slider 01
Flanged Bearing
[H0055BM]
8x 12x3.5mm
(HC418-S)
Spacer
8.1x
[H0029]
Tail Pitch Slider 02
(H0407-S)
5x 10x4mm
5x 9x0.75mm
Tail Rotor Hub Assembly
Tail Pitch Slider Link
Assembly
Bag 10
9.2x3.2mm
Tail Blade Grip
Assembly
Page 21