SAB Goblin black thunder Instruction Manual page 15

Uniball Arm Assembly
Flanged Bearing
2.5x 6x2.5mm
(HC400-S)
Uniball
Radius Arm
[H0205]
Spacer Arm
2.5x 4x6.3mm
[H0253]
Note:
The HPS head should be assembled with one, 1mm shim (HC230) and one,
0.2mm shim (HC232) on each side. The blade grips must move freely, but
they should not move just under their own weight. If the blade grips are too
tight, you can remove the 0.2mm shim (HC232) from each side. After
approximately 10/20 flights, please check preload, you can add one or two
0.2mm shim (HC232) if preload has changed.
Socket Head Cap
Screw M2.5x18mm
(HC032-S)
Uniball Arm
Assembly
Washer
(HC176-S)
Radius Arm
Assembly
Socket Head Cap
Screw M3x16mm
(HC068-S)
Linkage Rod A Assembly ...x2
Plastic Ball Link
(H0402-S)
Plastic Ball Link
(H0402-S)
... x2 Radius Arm Assembly
Flanged Bearing
3x 7x3mm
(HC402-S)
Spacer Arm
3x 5x2.7mm
[H0134]
Washer
10x 16x1mm
(HC230-S)
3x 4x0.5mm
Linkage Rod
Assembly
Linkage Rod
M3x50mm
(H0417-S)
(Initial length for the rods from the swashplate
to the Blade Grip.)
... x2 Center Hub Assembly
Radius Arm
(H0132BM-S)
Center Hub
(H0130BM-S)
Main Blade Grip Assembly
[HC232-S]
Thrust Bearing
10x 18x5.5mm
(HC438-S)
Main Blade Grip
Assembly
Note: Larger ID
Note: Smaller ID
Approx 76.6mm
Chapter 6,Head
Oring
(HA024)
Blade Grip
(H0679BM-S)
Blade Grip Arm
(H0131BM-S)
Socket Head Cap Bearing
Screw M3x10mm
(HC056-S) (HC422-S)
eg: Microlube GL261
Washer
10x 16x1mm
(HC230-S)
Bearing
10x
(HC422-S)
Washer
6x 14 x1.5mm
(HC194-S)
Socket Head Cap
Screw M6x10mm
(HC124-S)
BAG 6.1, BAG 6.2
eg: Microlube GL261
Spindle
(H0097-S)
Damper Derlin
(H0426-C)
...x2
Uniball M3
(H0065-S)
10x 19x5mm
19x5mm
Page 13