SAB Goblin black thunder Instruction Manual page 18

Chapter 8, Installation Of Swashplate Servos
BAG 8
The wire for the front servo must be positioned here
Head HPS Version Preliminary Setup
Adjust the linkage as shown. The linkage Rod A has thead right/left.
Turning, you can change the tracking without disconnecting the plastic ball link.
Linkade Rod A
Aseembly
Linkade Rod B
Aseembly
Page 16
Linkage Rod A Assembly ... x2
Approx 75.5mm
Plastic ball link
(H0402-S)
Initial length for the rods from the swashplate to the blade grips.
Linkage Rod B Assembly
Plastic ball link
(H0066-S)
Approx. 49 mm
Initial length for the rods from the servos to the swash plate.
Linkage Rod
Plastic ball link
(H0417-S) (H0402-S)
... x3
Set Screw M2.5x18mm
(HC140-S)
Plastic ball link
(H0066-S)