US Shift 4R70W Installation And Operation Manual page 30

Customize:
The main window is where all of the shift points and line pressure editing is
done. The graph displays the up-shift and down-shift speeds in relation to
throttle position for each shift. It also displays the line pressure & firmness curve
in relation to throttle position. The line pressure curve is displayed in PSI, so the
higher the curve, the more firm shifts will be. You can use the checkboxes on the
right to turn on the curves for individual shift firmness and adjust them
independently.
You can get help on anything by clicking the Question
and then clicking on an item. This can be used in any area of the software. The
help messages in the settings pages are transmission-specific and are more like
getting professional advice than normal help tips.
The graph has ten points from left to right, 0 being idle and 9 being Wide-Open-
Throttle (WOT). On the left side of the graph is the shift speed. When you hover
over a graph point, you can also see the corresponding shift speed in RPM or
the applicable unit values for items other than shift points. Click on a point in the
graph to select it.
30
The Main Window
button (or the F1 key)