Introduction:
Using the Shiftware software allows you to modify the way your Quick 4
Transmission Control System behaves. You can customize shift-points as well
as monitor and diagnose the Quick 4 unit in real-time.
Setup:
To create a calibration for the Quick 4, it is best to start with one of the standard
calibrations which are included with the software. To load a standard
configuration for your transmission, click the Open
then browse to the folder where the transmission calibration files are located.
(Default location is C:\Shiftware\) The files are named according to the
transmission and RPM range and have the .btc file extension. Choose the
calibration file and click Open.
Once the calibration file is loaded, click the System Settings
toolbar to check the settings and make sure that they are correct for your
transmission. The System Settings window has several tabs within it. Click each
one to see each section of settings specific for your transmission.
SHIFTWARE
The System Settings Window
button on the toolbar,
button on the
29