Table of Contents
Advertisement
To change
External sounder delay
Ext. sounder duration
Entry Time
Exit Time
Part Set Entry/Exit
Part Set Entry Route Zone
Response
Part Set Exit Mode
Part Set Alarm Response
Restoring Factory Default Settings (Command 98)
If you want to restore all the programming to the original factory defaults,
then:
2.
Key in 98 + ENTER.
The panel erases all programming the user or previous engineers have entered,
and restores the original factory defaults.
Leaving Programming Mode (Command 99)
1.
Close panel lid.
2.
Key in 99 ENTER.
The panel bleeps twice and the Power LED glow steadily. The panel is
now in user mode.
Key in: Followed by:
41
0 = Nil
1 = 1.5 mins
2 = 3 mins
3 = 5 mins
4 = 10 mins
5 = 15 mins
6 = 20 mins
42
0 = Nil
1 = 1.5 mins
2 = 3 mins (default)
3 = 5 mins
4 = 10 mins
5 = 15 mins
6 = 20 mins
43
1 = 1s
2 = 10s
3 = 15s
4 = 20s
5 = 30s
6 = 60s
44
0 = Continuous
1 = 1s
2 = 10s
3 = 15s
4 = 20s
5 = 30s
6 = 60s
51
Reserved. Do Not Use
60
0 = Starts Entry Timer
1 = Instant Alarm
61
0 = As Entry Route
1 = Start Entry Timer
62
0 = As Full Set
1 = Silent Set
2 = Instant Set
63
0 = Local (No comms)
1 = Full
496219 Issue 1
+ ENTER
21
Hide quick links:
Advertisement
Table of Contents
