Hitachi CP-WU5500 User Manual page 94

8. Other Functions
Setup the following functions through WEB browser, if you want to manage the
projector by SNMP.
Port Settings (&47)
1) Select [Port Settings] on main menu in Projector Web Control.
2) Click the [Download MIB file] to download a MIB file.
3) Click the [Enable] check box to open the SNMP Port. Set the address to send
the SNMP trap to when a Failure/Warning occurs.
Security Settings (&59)
1) Select [Security Settings] on main menu in Projector Web Control.
2) Click the [SNMP] and set the community name on the screen that is displayed.
Alert Settings (&51)
Configure the settings for Trap transmission of Failures/Warnings.
1) Select [Alert Settings] on main menu in Projector Web Control.
2) Select the Failure/Warning item to be configured.
3) Click the [Enable] check box to send out the SNMP trap for Failures/Warnings.
Clear the [Enable] check box when SNMP trap transmission is not required.
4) Click the [Apply] button to save the settings.
NOTE
• Register the downloaded MIB file to SNMP manager program to be used.
• Be sure to execute Network Restart when the settings of [Port Settings] or
[Security Settings] is changed.
94