Connection Via Wireless Lan - Hitachi CP-WU5500 User Manual

2. Connection to the network
2.4

Connection via wireless LAN

Connection via wireless LAN is available with option parts, USB wireless adapter
(USB-WL-11N).
Wireless LAN has two types of connection, Simple Access Point and
Infrastructure.
Fig. 2.4.a Without an access point communication (Simple Access Point)
Fig. 2.4.b With an access point communication (Infrastructure)
* Simple Access Point is a mode which connects to computers directly.
This projector can assign IP addresses to up to 11 devices.
* Infrastructure is one of the wireless LAN communication methods with having
an access point to communicate. If communicating with existing network, consult
with your network administrator.
NOTE
• Network settings can also be changed in Network Settings of Projector Web
Control.
• Wireless LAN initial settings for the projector are as follows.
Mode: Simple Access Point
DHCP: Off
IP address: 192.168.10.1
Subnet Mask: 255.255.255.0
Default Gateway: 0.0.0.0
DNS Server: 0.0.0.0
SSID: SimpleAccessPoint ※
SSID Broadcast: On
Encryption: Off
Channel: 11
※ Change default setting before use not to overlap.
(continued on next page)
14