Hitachi CP-WU5500 User Manual page 44

3. Web Control
3.1 Projector Web Control - Network Settings (continued)
Item
Wireless Setup
(continued)
Simple Access Point
settings
IP Configuration
IP Address
Subnet Mask
SSID
SSID Broadcast
Encryption
WPA Passphrase
Channel
(continued on next page)
44
Configures the wireless LAN settings.
Configures Simple Access Point mode.
Configures network settings.
Configures the IP address.
Subnet mask of the projector is fixed to 255.255.255.0.
Input SSID.
The maximum number of input characters is 32.
Only alphabets, numbers and the following symbols can be
used.
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ and space.
Default setting of SSID in Simple Access Point mode is
[SimpleAccessPoint].
Change default setting before use not to overlap.
Select SSID Broadcast.
Set this function to OFF when making SSID of a projector not
to be displayed in wireless connection list of the computer.
Select data encryption method.
Input WPA Passphrase.
Available number of input characters is 8 to 63. Only
alphabets, numbers and the following symbols can be used.
!"#$%&'()*+,-./:;<=>?@ [\]^_`{|}~ and space
Select from "1" to "11", a channel to use in the Simple Access
Point mode.
NOTE
• The channels may vary depending on the
country. In addition, depending on the country or region,
it may be required to use a wireless network card that
conforms to the standards in the respective country or
region.
Description