Hitachi CP-WU5500 User Manual page 45

Hide thumbs Also See for CP-WU5500:
Table of Contents

Advertisement

3.1 Projector Web Control - Network Settings (continued)
Item
Wireless Setup
(continued)
Infrastructure
settings
IP Configuration
DHCP ON
DHCP OFF
IP Address Configures the IP address when DHCP is disabled.
Subnet
Mask
Default
Gateway
DNS Server
Address
SSID
Encryption
WEP Key
WPA Passphrase
(continued on next page)
Configures the wireless LAN settings.
Configures Infrastructure mode.
Configures network settings.
Enables DHCP.
Disables DHCP.
Configures the subnet mask when DHCP is disabled.
Configures the default gateway when DHCP is disabled.
Configures the DNS server address.
Select an SSID from the list.
If you require to set your unique SSID, select [Custom], then
set your own SSID following the rules below.
The maximum number of input characters is 32.
Only alphabets, numbers and the following symbols can be
used.
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ and space.
Select data encryption method.
Input the WEP key.
Either ASCII characters or hexadecimal numbers can be
used during WEP key input. However, you cannot use a
combination of both.The length of the key is defined as
follows according to the WEP and character formats.
Encryption
WEP 64bit
WEP 128bit
Input WPA Passphrase.
Available number of input characters is 8 to 63. Only
alphabets, numbers and the following symbols can be used.
!"#$%&'()*+,-./:;<=>?@ [\]^_`{|}~ and space
Description
ASCII characters
5 characters
13 characters
3. Web Control
HEX numbers
10 characters
26 characters
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-x5500Cp-wu5505Cp-x5505Cp-wx5500Cp-wx5505

Table of Contents