Hitachi CP-WU5500 User Manual page 43

3.1 Projector Web Control - Network Settings (continued)
Item
Common Setup
(continued)
Crestron
Extron *
Wireless Setup
Mode
Encryption Lock
* CP-WU5505/CP-WX5505/CP-X5555 only
(continued on next page)
Configures the settings common to wireless and wired LAN.
Configures the Crestron setting to detect the projector from
the controllers of Crestron connected to the same network.
For the details of Crestron, visit the Crestron web site.
URL: http://www.crestron.com
Configures the Extron setting to detect the projector from
the controllers of Extron connected to the same network via
TM
HDBaseT
port. For the details of Extron, visit the Extron
web site.
URL: http://www.extron.com
NOTE
•
This item is enabled only when HDBaseT is
selected in OPTION - SERVICE - CONTROL TERMINAL-
WIRED NETWORK.
Operating Guide)
Configures the wireless LAN settings.
Select "Simple Access Point" or "Infrastructure".
NOTE
• When switching MODE, it takes 60 seconds
to be able to use wireless LAN. In the meantime, the
operating speed of the projector may be decreased
and NETWORK INFORMATION may not be displayed
correctly.
Permits or inhibits changes of the following settings related to
wireless connection.
･ Mode
･ SSID
･ SSID Broadcast
･ Encryption
･ Encryption key (WEP key, WPA passphrase)
When Encryption Lock is set to ON, these settings cannot be
changed by the menu of the projector.
NOTE
•
If Encryption Lock is ON, wireless connection
is performed only when it can be connected without
changing the current settings.
Description
(&OPTION menu in the
3. Web Control
43