Hitachi CP-WU5500 User Manual page 36

2. Connection to the network
Item
OTHER
OPERATION
(continued on next page)
36
To use Network Presentation, an exclusive application is
required. It can be installed from the bundled application
CD. You can also download the latest version and relevant
information from the Hitachi website.
Refer to 4. Network Presentation (&78) for the details of
Network Presentation.
If you set a computer to the Presenter mode
while its image is projected, the projector is
occupied by the computer and access from any
other computer is blocked.
QUIT
Use this function to quit the Presenter mode and
PRESENTER
allow other computers to access the projector.
MODE
Select this item to display a dialog.
Press the ► button to choose OK in the dialog.
The Presenter mode is cancelled and a message
is displayed indicating the result.
If you set one or more computers to the Multi
PC mode and send their images to the projector,
you can select the display mode on the projector
from two options below.
- Single PC mode: displays the image of the
selected computer on full screen.
- Multi PC mode: displays the images sent from
up to four computers on screen that is divided
into quarter sections.
Select this item to display a dialog.
MULTI PC
Use the dialog to change the display mode as
MODE
explained below.
• To change from Multi PC mode to Single PC
mode, select one of computers in the dialog
using the ▲/▼/◄/► buttons and press the
ENTER or INPUT button.
Press the ► button to choose OK, and then
press ENTER or INPUT again. The image
for the selected computer is displayed on full
screen.
(continued on next page)
Description