Hitachi CP-WU5500 User Manual page 28

2. Connection to the network
Item
NETWORK
SETUP
/
WIRELESS
SETUP
(continued)
(continued on next page)
28
SSID SCAN
LIST
(continued)
This function is not available in SIMPLE ACCESS
POINT mode.
Configures whether IP address is automatically
obtained or not.
Use the ▲/▼ buttons to turn DHCP on/off.
DHCP
ON  OFF
This function is not available in SIMPLE ACCESS
POINT mode.
[SIMPLE ACCESS POINT]
Refer to "Connection in Simple Access Point
Mode".(&16)
IP
[INFRASTRUCTURE]
ADDRESS
Configures the IP address when DHCP is disabled.
Enter the IP ADDRESS.
This function can only be used when DHCP is set
to OFF.
[SIMPLE ACCESS POINT]
This setting is fixed to 255.255.255.0.
[INFRASTRUCTURE]
SUBNET Configures the subnet mask when DHCP is
MASK disabled.
Enter the SUBNET MASK.
This function can only be used when DHCP is set
to OFF.
Configures the default gateway when DHCP is
disabled.
Enter the DEFAULT GATEWAY address.
DEFAULT
This function can only be used when DHCP is set
GATEWAY
to OFF.
This function is not available in SIMPLE ACCESS
POINT mode.
Description