Hitachi CP-WU5500 User Manual page 27

Item
NETWORK
SETUP
/
WIRELESS
SETUP
(continued)
(continued on next page)
(3) The OSD below is displayed while the
connection is in progress.
The keys other than RESET button are not
available while the connection is in progress.
The connection process is interrupted when
pressing the RESET button.
The OSD below is displayed when the connection
process is complete.
The message below is displayed when the
connection is not established correctly.
SSID SCAN
LIST
(continued)
(4) The icon indicating the connection status
(
connection is complete.
NOTE
･ Encryption settings cannot be
changed when encryption lock is enabled
in Network Settings – Wireless Setup in
Projector Web Control. Refer to Encryption
Lock. (&43)
• Open System Authentication is used for WEP
encryption, and Shared Key Authentication
is not supported. The authentication with an
access point is succeeded and it is regarded
that the connection is established normally
even when entering illegal encryption key
due to Open System Authentication, but data
cannot actually be transmitted.
) is displayed in SSID SCAN LIST when the
2. Connection to the network
Description
： Connection succeeded
： Connection failed
： Encryption Lock enabled
27