Hitachi CP-WU5500 User Manual page 70

3. Web Control
3.2 Crestron e-Control
NOTE
• In any of the following cases, the selection window does not appear
but the Login window of the Projector Web Control is displayed.
- Network Settings - Other Setup - Crestron e-Control is "Disable" (&46)
- Network Settings - Common Setup - Crestron is "OFF" (&43)
- NETWORK menu - EXTERNAL CONTROL - CRESTRON is "OFF" (&35)
Set Crestron to on and enable Crestron e-Control, then close the web browser.
Next, restart the web browser, followed by entering the projector's IP address.
• Only English is supported on Crestron e-Control
• If the connection is terminated, the "Loading..." screen will appear. Check the
connection between the projector and the computer, then return or refresh the
Web page.
• The control from Crestron e-Control
70
®
(continued)
is supported only via wired LAN.
®
.
®