Aligning The Front Of The Plate Warmer - Miele EGW 3060-10 Operating And Installation Instructions

Aligning the front of the plate warmer

22
After building in the combination appliance, it may be
necessary under certain circumstances to
– align the front of the plate warmer
– align the gap between the plate warmer and the
combination appliance.
To help you do this, there are adjusting points underneath the
nuts which secure the drawer to the telescopic runners.
^ Loosen the nuts and take the plate warmer drawer out.
Use the adjusters to
– raise or lower the drawer
– align the front of the drawer.