Aligning The Front Of The Food Warming Drawer - Miele ESW 47.2 Operating And Installation Manual

Aligning the front of the food warming drawer

After building in, it may be necessary to align the front of the
food warming drawer.
^ Remove screws
front.
^ Carefully lift the control panel out, taking care not to
damage or pull on the cable, and place it on the floor of the
drawer.
^ Loosen the 2 screws
^ Align the drawer front.
^ Tighten the screws on the inside of the drawer front.
^ Carefully replace the control panel, taking care not to
damage or pull on the cable.
^ Replace the 2 screws in the left and right side of the drawer
front.
from the left and right side of the drawer
on the inside of the drawer front.
35