Safety Instructions For Installation - Miele EGW 3060-10 Operating And Installation Instructions

Safety instructions for installation

~
Before connecting the appliance to the mains supply
make sure that the connection data on the data plate (voltage
and frequency) correspond with the mains electricity supply,
otherwise the appliance could be damaged.
Consult a qualified electrician if in any doubt.
~
The socket and on-off switch should be easily accessible
after the appliance has been built in.
~
The plate warmer may only be built in in combination with
those appliances quoted by the manufacturer as being
suitable. The manufacturer cannot guarantee trouble-free
operation if the appliance is operated in combination with
appliances other than those quoted by the manufacturer as
being suitable.
~
When building in the plate warmer in combination with
another suitable appliance, the plate warmer must be fitted
above a fixed interim shelf in the housing unit. Please ensure
that the housing unit can support the weight of the plate
warming drawer and that of the other appliance.
~
As the combination appliance is placed directly on top of
the plate warmer once it is built in, an interim shelf is not
necessary between the two appliances.
~
This appliance may only be installed in mobile installations
such as ships if a risk assessment of the installation has been
carried out by a suitably qualified engineer.
When building in the combination appliance, it is essential
to follow the instructions given in the operating and
installation instructions supplied with the combination
appliance.
All dimensions in this instruction booklet are given in mm.
19