Supermicro X11SSH-F User Manual page 54

X11SSH-F/-LN4F User Manual
SATA Ports
Eight SATA 3.0 connectors are located on the X11SSH-F/-LN4F motherboard, supported by
the Intel C236 PCH chip. These SATA ports support RAID 0, 1, 5, and 10. SATA ports provide
serial-link signal connections, which are faster than the connections of Parallel ATA. Refer to
the tables below for pin definitions.
Note 1: I-SATA0 and I-SATA1 are Supermicro SuperDOMs. These are yellow SATA-
DOM connectors with power pins built in and do not require separate external power
cables. These connectors are backward-compatible with non-Supermicro SATADOMs
that require an external power supply.
Note 2: For more information on the SATA HostRAID configuration, please refer to the
Intel SATA HostRAID user's guide posted on our website at http://www.supermicro.com.
X11SSH-F/-LN4F SATA 3.0 Connector
Types
Port # Connection Type
SATA 3.0/6 Gb/s
I-SATA0-1
RAID 0, 1, 5, 10
(Two)
SuperDOM connectors
I-SATA2-7 SATA 3.0/6 Gb/s
(Six) RAID 0, 1, 5, 10
Supported by Intel C236 PCH-Exp.
BMC
SP1
USB 2/3
BT1
JBT1
Intel PCH
8
I-SGPIO2
I-SGPIO1
2
7
JSD2
USB 8/9
6
(3.0)
JSD1
5
1
4
USB 4/5
3
VGA
LE1
USB 6/7
LAN 2/4
LAN 1/3
JUIDB1
(3.0)
LED BMC
BAR CODE
JPL3
JPL4
JPL2
MAC CODE
IPMI CODE
J23
CPU
LE3
USB 10
(3.0)
LED PWR
FANA FAN3
54
SATA 3.0 Port
Pin Definitions
Pin# Signal
1 Ground
2 SATA_TXP
3 SATA_TXN
4 Ground
5 SATA_RXN
6 SATA_RXP
7 Ground
COM 1
USB 0/1
J7 J8
IPMI_LAN
COM2
JPWR2
JPL1
JPWR1
1. I-SATA0
2. I-SATA1
3. I-SATA2
4. I-SATA3
5. I-SATA4
6. I-SATA5
7. I-SATA6
8. I-SATA7