How To Remove The Drain Pan - Mitsubishi Electric EHSC-VM2B Service Manual

DISASSEMBLY PROCEDURE
15. How to remove the drain pan (ERSC-VM2B only)
(1) Remove the front panel.
(2) Disconnect all the field piping.
(3) Cut the band holding the strainer. (Photo 15-2)
(4) Remove 3 screws on the cover plate. (Photo 15-3)
(5) Remove the cover plate. (Photo 15-4)
(6) Remove 3 screws each on the side panel (L, R), and 2
screws on the underneath surface and base assy from
the hydrobox. (Photo 15-5)
(7) Remove 5 screws on the base assy. (Photo 15-6)
(8) Remove the drain pan from the base. (Photo 15-7)
Photo 15-3
Cover plate
Screws
Photo 15-5
Screws
OCH532A
Photo 15-1
Photo 15-2
Photo 15-4
Photo 15-6
Photo 15-7
Screws
80
PHOTOS
Drain pan
Strainer
Band
Cover plate
Base assy
Screws
Drain pan
Base
Base