Sd Card - Mitsubishi Electric EHSC-VM2B Service Manual

SD card

The use of an SD memory card simplifi es the main controller settings in the fi eld.
*Ecodan service tool (for use with PC tool) is necessary for the setting.
<SD Main RC>
1. From the SD card setting use F1 and F2 buttons to scroll through list until
"SD Main RC" is highlighted.
2. Press CONFIRM.
3. Press F3 and F4 buttons to set the Ref. address. *1
4. Use F1, F2 and F3 buttons to select a menu to write to the main controller.
5. Press CONFIRM to start downloading.
6. Wait for a few minutes until "Complete!" appears.
*1 For multiple outdoor units control system only.
<Main RC SD>
1. From the SD card setting use F1 and F2 buttons to scroll through list until
Main RC SD is highlighted.
2. Press CONFIRM.
3. Press F3 and F4 buttons to set the Ref. address. *1
4. Use F1, F2 and F3 buttons to select a menu to write to the SD memory card.
5. Press CONFIRM to start uploading.
6. Wait for a few minutes until "Complete!" appears.
*1 For multiple outdoor units control system only.
OCH532A
42