Mitsubishi Electric EHSC-VM2B Service Manual page 33

<Main Controller Menu Tree>
Initial
Main screen
Main menu
Continued from the previous page.
OCH532A
Service
(Password protected)
Manual operation
Function settings
Thermistor adjustment
Auxiliary settings
Heat source setting
Operation settings
External input settings
Running information
Thermistor reading
Summary of settings
Error history
Password protection
Manual reset
SD card
*2 For more details, refer to the installation manual of PAC-TH011HT-E.
Economy setting for pump ON/OFF
Delay
Electric heater (Heating) ON/OFF
Delay
Electric heater (DHW) ON/OFF
Delay
Mixing valve control Running
Interval
Pump speed
Standard (Heat pump & electric heater)/Heater (Electric heater only)/Boiler/Hybrid (Heat pump
& heater/Boiler)
Freeze stat function Flow t.
Outdoor ambient temp.
Simultaneous operation ON/OFF
Outdoor ambient temp.
Cold weather function ON/OFF
Outdoor ambient temp.
Room temp. control (Heating) Temp. control interval
Flow temp. range
H/P thermo diff. adjust
Boiler settings Hybrid settings
*2
Intelligent settings
Floor dry up function ON/OFF
(For more details, Target temp.
refer to Page 39.)
Flow temp. (Increase)
Flow temp. (Decrease)
Demand control OFF (Heat source)/Boiler
Outdoor thermostat Heater/Boiler
Main controller Yes/No
FTC Yes/No
SD Main RC
Main RC SD
33
Unrestricted access
Installer only
Shaded items relate
to DHW functions.
These are only avail-
able if the system
includes a DHW tank.
Min. temp.
Max. temp.
ON/OFF
Lower limit
Upper limit
Outdoor ambient temp.
Priority Ambient/Cost /CO2
Energy price Electricity
Boiler
Schedule
CO emission Electricity
2
Boiler
Heat source Heat pump capacity
Boiler effi ciency
Booster heater 1
capacity
Booster heater 2
capacity
Start & Finish
Max. temp.
Max. temp. period
Temp. increase step
Increase interval
Temp. decrease step
Decrease interval