Table of Contents
Advertisement
Item
Time Code
Enable
Type
Size
Test Pattern
Settings Export/Import
Export
Import
Setting Options (underline indicates factory default)
Display the time code superimposed on the SDI signal.
Note
• When "Test Pattern" is "On", "Time Code" is not performed.
Switches the time code display On, Off.
On, Off
Selects the type.
VITC, LTC
Selects the size.
Large, Small
Sets the test pattern built into the main unit.
White, Gray (20%), Black, Ramp, 5 Step, Color Bars, PLUGE, Off
Note
• If the power is turned off once and then back on, the test pattern will not be displayed.
• The test pattern will be erased in the following cases:
- When calibration has been started
- When the channel is changed using the CH button, F button assigned for Channel UP/
Channel DOWN, or "Select Channel" under "Channel Settings"
- When changing "Input Configuration" or "Select Input Signal" under "Channel Settings"
- When "Reset All Settings" is executed
Sets the export/import main menu settings.
Note
• The following settings cannot be exported or imported. This is also true when "All" is selected.
- "Calibration" of "Adjustment" (including calibration result)
- "CDL Override" and "Test Pattern" of "Function Settings"
- "Date/Time" of "System Settings"
- Settings of CDL
• Data exported from this product may not be imported to products of which firmware version
is earlier than the version of this product.To import data, update the firmware to the latest
version.
Execute: Performs export.
Settings (All, Adjustment, Channel Settings, Display Settings, Marker Settings, Function
Settings, System Settings): Select the setting to import.
Execute: Performs import.
OSD Menu
49
Advertisement
Table of Contents
