Table of Contents
Advertisement
Channel Settings
This menu is used for input related settings. Select the "Select Channel" and choose a channel number from CH1 to
CH30. Finally define the parameter of each of the "Channel Settings".
Item
Select Channel
Input Configuration
Select Input Signal
Format
40
OSD Menu
Setting Options (underline indicates factory default)
Display the channel number. In addition, you can assign each content of "Channel Settings" to each
channel (
41).
CH1 to CH30
Note
• It may take 10 seconds when switching channels.
Select the input. Factory default depend on the channel (
3G/HD-SDI 1, 3G/HD-SDI 2, Dual Link HD-SDI, 3G-SDI 1, 3G-SDI 2, HD-SDI 1, HD-SDI-2,
DisplayPort, — (Not set)
Sets the signal display method (
4K Input: Displays the signal transmitted over four inputs.
Single Input: Displays the signal of a single input onto the center of the screen. Select from A to D.
Sets the color format and gradation.
Automatic, 4:2:2 YCbCr 10-bit, 4:2:2 YCbCr 12-bit, 4:4:4 YCbCr 10-bit,
4:4:4 YCbCr 12-bit, 4:4:4 RGB 10-bit, 4:4:4 RGB 12-bit, 4:4:4 XYZ 12-bit
Note
• HD-SDI is fixed to "4:2:2 YCbCr 10-bit".
• DisplayPort is fixed to "Automatic".
• If set to "Automatic" when receiving 3G-SDI or Dual Link HD-SDI input, all four signals without
a payload format will be rendered in "4:4:4 RGB 10-bit". In addition, if there is one Payload or
more of the four inputs, they are rendered in a Payload that is selected in the order of priority
A → B → C → D in the display area.
41).
16).
Advertisement
Table of Contents
