Table of Contents
Advertisement
ASSEMBLY
INSTRUCTIONS
(cont'd)
D.
Installing
Handlebar
Place the handlebar
(4) on the handlebar
stem (3) and tighten
knob (5) shown in Fig. 4. Insert
the handlebar
stem into the main body (74) shown in Fig. 11 and tighten the knobs (83 & 87) by
turning
them clockwise.
Plug the connector
(14) from the handlebar
post into the connector
(89)
from the main body (74). Place the cap (15) and secure with screws (13) (Fig. 11 )
•
Handlebar
Height
Adjust:
loosen
knob (83 & 87) slightly by turning
counterclockwise
a turn
or two.
Move the handlebar
up/down
to a desired
height and tighten the knobs in the
clockwise
direction.
Pay attention
not to go beyond
MIN INSERT
mark
•
Handlebar
Horizontal
Adjust:
loosen
the knob (5) by turning
counterclockwise;
move the
handlebar
to a distance
comfortable
for doing exercise
and then tighten the knob (5).
4
Fig. 10
Fig. 11
87
74
E. Attaching
Bottle Holder
Mount the bottle holder
(85) to the side of
the front fork using screws (86) (fig. 11)
Leveling:
once the unit has been placed into
its final position,
make sure it sits flat and level
on the floor.
If needed,
make adjustment
for
the footpads
(121) by dialing the wheels
(121)
on the sides of the stabilizers
(Fig. 12)
BLADEZ
°
F
_
T
N
E
S
$
\
121
Fig. 12
AEROPRO
Advertisement
Table of Contents
