Hitachi Compute Blade 500 Series User Manual page 31

Items
Maintenance
Hot standby
status
Version
FRU
MAC Address
Management
LAN settings
Sensor
Management module LID
Operation: Home > Hardware maintenance > Management module >
LID
In the LID window, you can confirm the LID status of management module.
You can also set up LID light on/off.
1 Touch Home > Hardware maintenance > Management module >
.
target management module > LID, and then the LID window will be
displayed.
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
ON: Power-on LID
OFF: Power-off LID
---: No module installed
Numeric value: Maintenance mode is enabled. Numeric value shows
the time period, which is in minutes, until automatic cancellation.
OFF: Maintenance mode disabled.
Displays that the module is main/standby.
Active : Active module
Standby: Standby module
---: No module installed
Firmware
Dictionary
Equipment parameter
Board Information
Product Information
Multi Record Area
Management LAN port
Maintenance LAN port
IP Address
Subnet mask
Default Gateway
Temperature
Voltage
Functional detail
Descriptions
Displays the firmware version in the
management module. Some version
may not be displayed.
Displays the installed dictionary version.
Displays the installed equipment
parameter.
Displays the Board Information FRU.
Displays the Product Information FRU.
Displays the Multi Record Area FRU.
Displays the MAC address of
management LAN port.
Displays the MAC address of
maintenance LAN port.
Displays the IP address of management
LAN.
Displays the subnet mask of
management LAN.
Displays the default gateway of
management LAN.
Displays the temperature.
Displays the volt.
2-17