Connecting To Server Chassis; Disconnecting From Server Chassis - Hitachi Compute Blade 500 Series User Manual

The above example means that Home window move to System settings
window by touching a button.

Connecting to Server chassis

For using the LCD touch console, connect the LCD touch console to a USB
port of front panel in a server chassis with an attached USB cable. Both the
USB port #0 and #1 of front panel in the server chassis are available for
using the LCD touch console.
Note:
• A USB hub or a USB switching device is not available for connecting to the
USB port on the front panel.
• The LCD touch console is not available when it is connected to the USB
port on a server blade.
• If the LCD touch console is disabled from CLI console, it is not available
even if connected to the USB port.
• If USB connection ports are set to disabled in the USB port settings, you
cannot use the LCD touch console.
If you connect the LCD touch console to a USB connection port, the LCD
touch console cannot be operated while the character string Please
wait... is displayed on the screen. In this case, remove the LCD touch
console from the USB connection port.
Connect the USB flash drive to the one of USB ports of the front panel in the
server chassis when using the USB flash drive for the LCD touch console. The
other USB port is connected the LCD touch console.

Disconnecting from Server chassis

Perform the following procedure to remove the USB flash drive from the USB
port on the server chassis.
1. Touch USB device unmount on the LCD touch console window.
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
Figure 1-2 Connecting LCD touch console to server chassis
LCD touch console overview
1-3