Hitachi Compute Blade 500 Series User Manual page 23

Server blade detail information
Operation: Home > Hardware maintenance > Server blade > Detail
information
In the Detail information window, you can confirm the detail information of
server blade.
1 Touch Home > Hardware maintenance > Server blade > target
.
server blade > Detail information, and then the Detail information
window will be displayed.
Install
Power
Status
Init status
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
Table 2-8 Server blade detail information
Items
Functional detail
Descriptions
Displays the status of installed server
blade.
Installed : Server blade installed
Not installed: No server blade installed.
In SMP configuration, (P) or (NP) is
added to Installed or Not installed to
indicate Primary or Not as follows.
(P): Primary server blade
(NP): Non-primary server blade
Displays the power status of server
blade.
ON: Power-on (including during Smart
Configure)
Powering ON: Progress of power-on
OFF: Power-off (including the sleep
status)
Powering OFF: Progress of power-off
-----: Indicates that there is no
information that should be displayed.
For example, when no server blade is
installed, or when the server blade is a
non-primary server blade.
Displays a status of server blade
operation.
Normal: Normal operation
Warning: Warning status
Fail: Failure status
-----: Indicates that there is no
information that should be displayed.
For example, when no server blade is
installed, or when the server blade is a
non-primary server blade.
Displays the initialized status. After the
initialization completes successfully,
power operation is available.
2-9