Hitachi Compute Blade 500 Series User Manual page 27

In the Switch module window, you can confirm the current status summary
of switch module and the detail information of each switch module. You can
also move the maintenance mode.
1 Touch Home > Hardware maintenance > Switch module, and then
.
the Switch module window is displayed.
Items
#
Install
Power
Status
LID
Maintenance Value: Maintenance mode is enabled. Value shows the time period, which
Type
Switch module detail information
Operation: Home > Hardware maintenance > Switch module > Detail
information
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
Table 2-9 Switch module
Displays the module number.
Displays the status of installed module.
Installed : Module installed
Not installed: No module installed.
Displays power status of module.
ON: Power-on
OFF: Power-off (including sleep status)
---: No module installed.
Displays a status of module operation.
Normal: Normal operation
Warning: Warning status
Fail: Failure status
---: No module installed.
Displays LID power-on/off status.
ON: Power-on LID
OFF: Power-off LID
---: No module installed.
is in minutes, until automatic cancellation.
OFF: Maintenance mode is disabled.
Displays the following various switches.
1G LANSW: Hitachi 1 Gb/sec LAN switch module (20 ports)
1G 40LAN-SW: Hitachi 1 Gb/sec LAN switch module (40 ports)
1/10G LAN-SW: Hitachi 1/10 Gb/sec LAN switch module
8G FC-SW: Brocade 8 Gb/sec Fibre Channel Switch Module
16G FC-SW: Brocade 16 Gb/sec Fibre Channel Switch Module
10G DCB-SW: Brocade 10 Gb/sec DCB Switch Module
1G LAN-PT: 1 Gb/sec LAN Pass-through Module
10G LAN-PT: 10 Gb/sec LAN Pass-through Module
---: No module installed.
Functional detail
Descriptions
2-13