Home; Unconfirmed Events; Operation Status Of System Unit - Hitachi Compute Blade 500 Series User Manual

Home

The following Home window will appear once the LCD touch console is
successfully connected to the Server chassis.
Tip: If PIN setting is enabled, the window requests the PIN. Once the PIN is
accepted, the Home window will appear. See
details.

Unconfirmed events

The following icons indicate that failures or warnings occur in the system unit.
Icons
Warning
Failure

Operation status of system unit

The following icons indicate the active status for each installed modules.
2-2
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
Figure 2-1 Home window
Table 2-1 Unconfirmed events
One or more modules is/are in a warning state.
For details of warning, check the content in the web console.
One or more modules is/are in a failure state.
For details of warning, check the content in the web console.
Functional detail
PIN settings on page 2-6
Descriptions
for