Storing Of Lcd Touch Console - Hitachi Compute Blade 500 Series User Manual

2. Remove the USB flash drive from the USB port of the server chassis after
unmounting a USB device.
Perform the following procedure to logout the LCD touch console for
disconnecting the LCD touch console from the server chassis.
3. Touch Logout on the LCD touch console window.
Logout operation is completed.
4. Disconnect the USB cable, which connect the LCD touch console, from the
USB port of the server chassis.
Note: If you remove the USB flash drive without unmounting operation, the
data may be inaccessible or damaged while in transit to/from the USB flash
drive.

Storing of LCD touch console

A slide case which stores an LCD touch console is equipped in a server
chassis. Pull out the slide case from the server chassis, each stores the LCD
touch console and a USB cable separately. The USB cable is wound around
the guide of the case so as not to overflow from the slide case.
1-4
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
Figure 1-3 LCD touch console window
LCD touch console overview