Hitachi Compute Blade 500 Series User Manual page 22

In the Server blade window, you can confirm the current status summary of
server blade and the detail of each server blade. You can also move to each
setup windows, such as LID operation, firmware update, and maintenance
mode setup.
1 Touch Home > Hardware maintenance > Server blade, and then the
.
Server blade window is displayed.
Items
#
Install
Power
Status
LID
Maintenance Value: Maintenance mode is enabled. Value shows the time period, which
2-8
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
Table 2-7 Server blade
Displays the server blade number.
Displays the status of installed server blade.
Installed : Server blade installed
Not installed: No server blade installed.
In SMP configuration, (P) or (NP) is added to Installed or Not installed to
indicate Primary or Not as follows.
(P): Primary server blade
(NP): Non-primary server blade
Displays the power status of server blade.
ON: Power-on (including during Smart Configure)
Powering ON: Progress of power-on
OFF: Power-off (including the sleep status)
Powering OFF: Progress of power-off
-----: Indicates that there is no information that should be displayed. For
example, when no server blade is installed, or when the server blade is a
non-primary server blade.
Displays a status of server blade operation.
Normal: Normal operation
Warning: Warning status
Fail: Failure status
-----: Indicates that there is no information that should be displayed. For
example, when no server blade is installed, or when the server blade is a
non-primary server blade.
Displays LID power-on/off status.
ON: Power-on LID
OFF: Power-off LID
-----: Indicates that there is no information that should be displayed. For
example, when no server blade is installed, or when the server blade is a
non-primary server blade.
is in minutes, until automatic cancellation.
OFF: Maintenance mode is disabled.
Functional detail
Descriptions