System Settings; Network Settings - Hitachi Compute Blade 500 Series User Manual

None
?

System settings

Operation: Home > System settings
The System settings window is the setup menu for initial settings.
In the System settings window, you can move to each setup windows to set
initial settings.
1 Touch Home > System settings, and then the System settings
.
window is displayed.

Network settings

Operation: Home > System settings > Network settings
In the Network settings window, you can set up IP address, subnet mask,
and default gateway of the management module which is connected to the
management LAN.
1 Touch Home > System settings > Network settings, and then the
.
Network settings window is displayed.
IP address
Subnet mask
Default gateway
Tip: Only IPv4 addresses can be set up from the LCD touch console. To set
up IPv6 addresses, use the Web console or the CLI console.
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
Table 2-2 Operation status
Icons
A module is running properly.
A module installed in the location is initializing.
A module installed in the location is in a warning state.
A module installed in the location is in a failure state.
A module installed in the location is set in maintenance mode.
Table 2-3 Network settings
Items
Displays the IP address of the management module.
Displays the subnet mask of the management module.
Displays the default gateway of the management module.
Functional detail
Descriptions
Descriptions
2-3