Specifications - Makita DJR181 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Shoe
3-2. Shoe button
4-1. Shoe button

SPECIFICATIONS

Length of stroke
Strokes per minute(min
Max. cutting capacities
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for sawing wood, plastic and ferrous
materials.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model DJR181
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model DJR182
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model DJR181
Work mode : cutting boards
Vibration emission (a
Uncertainty (K) : 2.0 m/s
Explanation of general view
4-2. Shoe
5-1. Lock-off button
5-2. Switch trigger
6-1. Lamp
7-1. Hook
8-1. Blade clamp sleeve
8-2. Released position
Model
-1
)
Pipe
Wood
Overall length
Net weight
Rated voltage
) : 86 dB (A)
pA
) : 97 dB (A)
WA
) : 85 dB (A)
pA
) : 96 dB (A)
WA
2
) : 12.5 m/s
h,B
2
DJR181
499 mm
3.7 kg
ENE020-1
Work mode : cutting wooden beams
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENG905-1
Model DJR182
Work mode : cutting boards
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : cutting wooden beams
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
ENG900-1
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
3
8-3. Fixed position
9-1. Blade
10-1. Blade clamp lever
12-1. Limit mark
13-1. Brush holder cap
13-2. Screwdriver
DJR182
28 mm
0 - 2,900
130 mm
255 mm
449 mm
3.6 kg
D.C. 18 V
2
) : 14.0 m/s
h,WB
2
2
) : 14.5 m/s
h,B
2
2
) : 12.5 m/s
h,WB
2
ENG901-1