SPECIFICATIONS Model DJR181 Length of stroke 28 mm Strokes per minute(min 0 - 2,900 Max. cutting capacities Pipe 130 mm Wood 255 mm Overall length 499 mm Net weight 3.5 - 3.8 kg Rated voltage D.C. 18 V • Due to our continuing program of research and development, the specifications herein are subject to change without notice.
Do not abuse the cord. Never use the cord for NOTE: The declared vibration total value(s) has been carrying, pulling or unplugging the power tool. measured in accordance with a standard test method Keep cord away from heat, oil, sharp edges and may be used for comparing one tool with another.
Battery tool use and care Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically desig- nated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one...
SAVE THESE INSTRUCTIONS. CAUTION: Only use genuine Makita batteries. WARNING: DO NOT let comfort or familiarity Use of non-genuine Makita batteries, or batteries that with product (gained from repeated use) replace have been altered, may result in the battery bursting strict adherence to safety rules for the subject causing fires, personal injury and damage. It will product.
Battery protection system (Lithium- FUNCTIONAL ion battery with star marking) DESCRIPTION CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before adjust- ing or checking function on the tool. Installing or removing battery cartridge ► 1 . Star marking Lithium-ion batteries with a star marking are equipped with a protection system. This system automatically cuts off power to the tool to extend battery life. The tool will automatically stop during operation if the tool and/or battery are placed under one of the following conditions: • Overloaded: The tool is operated in a manner that causes it to draw an abnormally high current.
Switch action Indicator lamps Remaining capacity Lighted Blinking 75% to 100% 50% to 75% 25% to 50% 0% to 25% Charge the battery. The battery may have ► 1 . Lock-off button 2. Switch trigger malfunctioned. CAUTION: • Before inserting the battery cartridge into the tool, always NOTE: Depending on the conditions of use and the ambient tem- check to see that the switch trigger actuates properly perature, the indication may differ slightly from the actual capacity.
Hook ► 1 . Blade clamp sleeve 2. Released position 3. Fixed position ► 1 . Hook Insert the saw blade into the blade clamp as far as it will go. The blade clamp lever rotates and the saw blade is fixed. Make sure that the saw blade cannot be extracted CAUTION: even though you try to pull it out.
Failure to do so will cause prema- formed by Makita Authorized Service Centers, always ture blade wear. using Makita replacement parts. Press the shoe firmly against the workpiece. Do not allow the tool to bounce. Bring the blade into light con- tact with the workpiece. First, make a pilot groove using OPTIONAL ACCESSORIES a slower speed.
NOTE: • Some items in the list may be included in the tool package as standard accessories. They may differ from country to country. 10 ENGLISH...