Makita DJR181 Instruction Manual

Makita DJR181 Instruction Manual

Cordless recipo saw
Hide thumbs Also See for DJR181:


Cordless Recipro Saw
IMPORTANT: Read Before Using.


Table of Contents

Summary of Contents for Makita DJR181

  • Page 1 INSTRUCTION MANUAL Cordless Recipro Saw DJR181 DJR182 006896 IMPORTANT: Read Before Using.
  • Page 2: Specifications

    The vibration total value (tri-axial vector sum) determined In observance of European Directive according to EN60745: 2012/19/EU on waste electric and electronic equipment, 2006/66/EC on Model DJR181 batteries and accumulators and waste Work mode : cutting boards batteries and accumulators and their Vibration emission (a ) : 12.5 m/s...
  • Page 3: General Power Tool Safety Warnings

    For European countries only Work area safety EC Declaration of Conformity Keep work area clean and well lit. Cluttered or Makita declares that the following Machine(s): dark areas invite accidents. Designation of Machine: Do not operate power tools in explosive...
  • Page 4 medication. A moment of inattention while are caused by poorly maintained power tools. operating power tools may result in serious 22. Keep cutting tools sharp and clean. Properly personal injury. maintained cutting tools with sharp cutting edges Use personal protective equipment. Always are less likely to bind and are easier to control.
  • Page 5 Always use safety glasses or goggles. If electrolyte gets into your eyes, rinse them Ordinary eye or sun glasses are NOT safety out with clear water and seek medical glasses. attention right away. It may result in loss of Avoid cutting nails. Inspect workpiece for any your eyesight.
  • Page 6: Functional Description

    Battery protection system FUNCTIONAL DESCRIPTION (Lithium-ion battery with star marking) CAUTION: 1. Star marking Always be sure that the tool is switched off and the • battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1.
  • Page 7: Switch Action

    Release the switch trigger to stop. After any work on the tool. use, always press in the lock-off button from A side. Installing or removing the saw blade Lighting up the front lamp (For DJR181) CAUTION: 1. Lamp Always clean out all chips or foreign matter •...
  • Page 8: Operation

    OPERATION 1. Blade clamp sleeve 2. Released position 3. Fixed position 005787 Insert the saw blade into the blade clamp as far as it will go. The blade clamp lever rotates and the saw blade is 006903 fixed. Make sure that the saw blade cannot be extracted CAUTION: even though you try to pull it out.
  • Page 9: Optional Accessories

    Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Recipro saw blades • Makita genuine battery and charger • Plastic carrying case •...
  • Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan 885249A227...

This manual is also suitable for:


Table of Contents