Makita DJR188 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Cordless Saw
  5. DJR188
  6. Instruction manual

Makita DJR188 Instruction Manual

Cordless recipro saw
Hide thumbs Also See for DJR188:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Cordless Recipro Saw
DJR188
Read before use.

Advertisement

Table of Contents
loading

Related Manuals for Makita DJR188

Summary of Contents for Makita DJR188

  • Page 1 INSTRUCTION MANUAL Cordless Recipro Saw DJR188 Read before use.

  • Page 2: Specifications

    SPECIFICATIONS Model: DJR188 Length of stroke 20 mm Strokes per minute 0 - 3,000 min Max. cutting capacities Pipe 130 mm Wood (with 300 mm blade) 255 mm Rated voltage D.C. 18 V Standard battery cartridge BL1815N, BL1820, BL1820B, BL1830, BL1830B, BL1840,...

  • Page 3: Safety Warnings

    Personal Safety SAFETY WARNINGS Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or General power tool safety warnings under the influence of drugs, alcohol or med- ication. A moment of inattention while operating WARNING: power tools may result in serious personal injury.
  • Page 4 Power tool use and care Do not use a battery pack or tool that is dam- aged or modified. Damaged or modified batteries Do not force the power tool. Use the correct may exhibit unpredictable behaviour resulting in power tool for your application. The correct fire, explosion or risk of injury. power tool will do the job better and safer at the rate for which it was designed.
  • Page 5 MISUSE or failure to follow the safety also void the Makita warranty for the Makita tool and rules stated in this instruction manual may cause charger. serious personal injury.

  • Page 6: Functional Description

    Overload protection FUNCTIONAL When the battery is operated in a manner that causes DESCRIPTION it to draw an abnormally high current, the tool automat- ically stops without any indication. In this situation, turn the tool off and stop the application that caused the tool CAUTION: Always be sure that the tool is to become overloaded. Then turn the tool on to restart.
  • Page 7 Pull the switch trigger to light up the lamp. The lamp NOTE: Depending on the conditions of use and the keeps on lighting while the switch trigger is being pulled. ambient temperature, the indication may differ slightly The lamp goes out approximately 10 seconds after from the actual capacity. releasing the switch trigger. Switch action NOTE: Use a dry cloth to wipe the dirt off the lens of the lamp.

  • Page 8: Operation

    Insert the recipro saw blade into the blade clamp as far NOTE: If you remove the recipro saw blade without as it will go. The blade clamp sleeve rotates and fixes rotating the blade clamp lever fully, the lever may not the recipro saw blade. Make sure that the recipro saw be locked in the released position .

  • Page 9: Maintenance

    Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center.
  • Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885609-223 www.makita.com 20170605...

This manual is also suitable for:

Djr188z

Table of Contents