Setup - Ship's Gyro Compass; Setting The Gyro Type - Sea Tel 4012 GX KU-BAND Technical Manual

Setup – Ship's Gyro Compass
6. Setup – Ship's Gyro Compass
The Ships Gyro Compass connection provides true heading (heading of the ship relative to true North) input to the system. This
allows the ICU to target the antenna to a "true" Azimuth position to acquire any desired satellite.
After targeting, this input keeps the antenna stabilized in Azimuth (keeps it pointed at the targeted satellite Azimuth).
6.1.

Setting the Gyro Type

The GYRO TYPE parameter selects the type of gyro compass interface signal, the appropriate hardware connections,
and the ratio of the expected input signal for ship turning compensation. Default GYRO TYPE parameter for all
systems is Step-By-Step so that the ICU will properly follow for Step-By-Step or NMEA gyro signals.
If the Ships Gyro Compass output is Synchro, or there is NO Gyro Compass, the GYRO TYPE parameter must be set
correctly to properly read and follow the Ships Gyro Compass signal that is being provided. To manually update the
Gyro Type parameter:
1. Go to the Communications Interface screen.
2. Click the Gyro Type drop down menu.
3. Select the correct Gyro type.
4. Click Save, at the bottom left area of the
screen.
6.2. If there is NO Ships Gyro Compass
Without heading input to the system the MXP will NOT be able to easily target, or stay stabilized ON, a "true" azimuth
pointing angle. This will make satellite acquisition much more difficult and the true azimuth value that any given
satellite should be at will not be displayed correctly.
This mode of operation is NOT recommended for ships or any other vessel that turns in the water. A better solution
would be to provide a Satellite Compass (multiple GPS Antenna device) to provide true heading input to the ACU.
These devices are readily available and are much less expensive than a Gyro Compass.
If there is NO Gyro Compass (ie on a large stationary rig which is anchored to the ocean floor) set the GYRO TYPE
parameter to "No Gyro" or to "Fixed".
Sea Tel – Proprietary. Do Not Copy, Distribute or Disclose
4012 GX Dealer Technical Manual
Document. No. 136879 Revision B
6-1