Maintenance
4.
5.
6.
7.
8.
Sea Tel – Proprietary. Do Not Copy, Distribute or Disclose
Using a small flat blade screwdriver
remove the Azimuth motor cable from
the Motor Drive Enclosure (MDE).
Using snips carefully cut the tie wraps
that secure the azimuth motor cable to
the home sensor interface cable and the
MDE.
Remove one side of the spring
tensioner.
Using a 3mm Allen wrench, remove the
hardware that secures the azimuth
motor to its' mounting bracket. Retain
hardware for future use.
Remove motor and set aside.
4012 GX Dealer Technical Manual
Document. No. 136879 Revision B
21-13