Home >
Appendix
> How to Enter Text on Your Brother Machine
How to Enter Text on Your Brother Machine
>> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW
>> HL-L6400DW
HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW
When setting certain options, such as the Network Key, you must enter characters on the machine:
•
Hold down or repeatedly press a or b to select a character from this list:
0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ(space)!"#$%&'()*+,-./:;<=>?
@[]^_
•
Press OK when the character or symbol you want is displayed, and then enter the next character.
•
Press Back to delete characters entered incorrectly.
HL-L6400DW
When text is required, a keyboard appears on your machine's LCD.
•
The characters may differ depending on your country.
•
The keyboard layout may differ depending on the operation you perform.
•
Press
to cycle between letters, numbers and special characters.
•
To move the cursor to the left or right, press d or c.
Inserting spaces
•
To enter a space, press
Making corrections
•
If you entered a character incorrectly and want to change it, press d or c to move the cursor to the incorrect
character and press
•
To insert a character, press d or c to move the cursor to the correct place, and then enter the character.
•
Press
for each character you want to erase, or press and hold
Related Information
•
Appendix
•
Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using an Existing SSID
•
Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
•
Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using a New SSID
twice to choose special characters, then press the space button.
. Enter the correct character.
to erase all the characters.
357