Configure Your Machine For A Wireless Network In Ad-Hoc Mode (For Ieee 802.11B/G/N) - Brother HL-L5100DN User Manual
Hide thumbs
Also See for HL-L5100DN:
- Service manual (433 pages) ,
- User manual (384 pages) ,
- Reference manual (19 pages)
Table of Contents
Advertisement
Home >
Network
>
Additional Methods of Configuring Your Brother Machine for a Wireless
Network
> Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n)
Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For
IEEE 802.11b/g/n)
•
Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using a New SSID
You must connect to a new SSID from your computer when it is configured for Ad-Hoc mode.
•
Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using an Existing SSID
If you are trying to pair your Brother machine to a computer that is already in Ad-Hoc mode and has a configured SSID,
use these instructions.
102
- Quick Links:
- Reset Functions
- Factory Reset
Hide quick links:
Advertisement
Table of Contents
