Brother HL-L5100DN User Manual page 252

Error Message
No Paper Fed T1
No Paper Fed T2
No Paper Fed T3
No Paper Fed T4
No Paper MP
No Paper T1
No Paper T2
No Paper T3
No Paper T4
No Toner
No Tray T1
No Tray T2
No Tray T3
No Tray T4
Out of Memory
Output Tray Full
Paper Low
Paper Low Tray 1
Paper Low Tray 2
Paper Low Tray 3
Paper Low Tray 4
Print Data Full
Print Unable ##
Replace Toner
Cause
The machine failed to feed paper
from the indicated paper tray.
The MP tray is out of paper, or
paper is not loaded correctly in the
MP tray.
The machine failed to feed paper
from the indicated paper tray.
The toner cartridge or the toner
cartridge and drum unit assembly
is not installed correctly.
The paper tray is not installed or
not installed correctly.
The machine's memory is full.
The output paper tray is full.
The paper tray is nearly empty.
The machine's memory is full.
The machine has a mechanical
problem.
The toner cartridge is at the end of
its life. The machine stops all print
operations.
Action
Pull out the paper tray indicated on the LCD
and remove all jammed paper.
Do one of the following:
• Refill paper in the MP tray. Make sure the
paper guides are set to the correct size.
• If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.
Do one of the following:
• Refill paper in the paper tray indicated on
the LCD. Make sure the paper guides are
set to the correct size.
• If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.
• Do not overfill the paper tray.
Remove the toner cartridge and drum unit
assembly. Remove the toner cartridge from the
drum unit, and reinstall the toner cartridge
back in the drum unit. Reinstall the toner
cartridge and drum unit assembly back in the
machine. If the problem continues, replace the
toner cartridge with a new one.
Reinstall the paper tray indicated on the LCD.
Press and reduce the print resolution.
Remove printed paper from output tray
indicated on the LCD.
Refill the paper in the paper tray indicated on
the LCD.
Press and delete the previously stored
secure print data.
• Press and hold to turn the machine off,
wait a few minutes, and then turn it on
again.
• If the problem continues, contact Brother
customer service.
Replace the toner cartridge with a new one.
247