Brother HL-L5100DN User Manual page 336

Level 1 Level 2
Carbon Menu
Copy1 Macro
(Available only for
certain models)
Copy2 Tray ...
Copy8 Tray
Copy2 Macro ...
Copy8 Macro
(Available only for
certain models)
[Network] (HL-L5100DN)
Level 1 Level 2
TCP/IP Boot Method
IP Address
Subnet Mask
Gateway
IP Boot Tries Specify the number of attempts the machine will try to obtain an IP address
APIPA
IPv6
Ethernet -
Wired Status -
MAC Address -
IPsec
-
Network Reset -
1 On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address from the machine's control panel.
[Network] (HL-L5200DW/HL-L6200DW)
Level 1 Level 2
Wired LAN TCP/IP
Ethernet
Wired Status
MAC Address
Description
Select a macro for Copy1.
Select the tray you use for Copy2 to 8.
The menu appears when printing two pages or more.
Select a macro for Copy2 to 8.
The menu appears when printing two pages or more.
Description
Choose the IP method that best suits your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
when the Boot Method is set to any setting except Static.
Allocate the IP address from the link-local address range automatically
Enable or disable the IPv6 protocol.
Choose the Ethernet link mode.
Display the Ethernet link status.
Display the MAC address of the machine.
IPsec is an optional security feature of the IP protocol that provides
authentication and encryption services. We recommend contacting your
network administrator before changing this setting.
Restore all network settings of your machine to the factory settings.
Level 3 Description
Boot Method Choose the IP method that best suits your needs.
IP Address Enter the IP address.
Subnet Mask Enter the Subnet mask.
Gateway Enter the Gateway address.
IP Boot Specify the number of attempts the machine will try to obtain
Tries an IP address when the Boot Method is set to any setting
except Static.
APIPA Allocate the IP address from the link-local address range
automatically
IPv6 Enable or disable the IPv6 protocol.
- Choose the Ethernet link mode.
- Display the Ethernet link status.
- Display the MAC address of the machine.
1
.
1
.
331