Paper Is Jammed In The Mp Tray - Brother HL-L5100DN User Manual

Home > Troubleshooting

Paper is Jammed in the MP tray

If the machine's control panel or the Status Monitor indicates that there is a jam in the machine's MP tray, follow
these steps:
1. Remove the paper from the MP tray.
2. Remove any jammed paper from in and around the MP tray.
3. Fan the paper stack, and then put it back in the MP tray.
4. Reload paper in the MP tray and make sure the paper stays under the maximum paper height guides (1) on
both sides of the tray.
1
5. Do one of the following:
• (HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW)
Press Go to resume printing.
• (HL-L6400DW)
Press [Retry] to resume printing.
Related Information
• Paper Jams
> Paper Jams > Paper is Jammed in the MP tray
251