Single Image - Brother HL-L5100DN User Manual

Level 2 Level 3
Skip Tray -
Separator Tray -
2-sided 2-sided
Print

Single Image

Paper Type MP Tray
Tray 1
Tray 2
Tray 3
Tray 4
Paper Size MP Tray
Tray 1
Tray 2
Tray 3
Tray 4
Paper Low Paper Low
Notice Notice
Notice Level
Check Size -
1 Available if the Mailbox is installed.
2 Available if the Optional Tray(s) is installed.
[Settings] > [General Setup]
Level 2 Level 3
Local Language -
Resolution -
Density -
Ecology Toner Save
Sleep Time
Quiet Mode
Auto Power Off -
Volume Beep
Panel Control LCD Settings
Descriptions
Select a specific tray you do not want to use; if it is loaded with paper of the
wrong size.
Select the tray that contains the paper used as the separator paper, which is
inserted between each print job.
Select whether to print on both sides of the paper.
For a print job where the last page is a 1-sided image, select the 1-sided
Feed option to reduce printing time.
When you use Letterhead or Preprinted paper, you must select the 2-
sided Feed option. If you select 1-sided Feed for Letterhead or
Preprinted paper, the last page will be printed on the reverse side.
Select the paper type that matches the paper in the MP tray.
Select the paper type that matches the paper in the standard paper tray.
2 Select the paper type that matches the paper in the Optional Tray (Tray 2).
2 Select the paper type that matches the paper in the Optional Tray (Tray 3).
2 Select the paper type that matches the paper in the Optional Tray (Tray 4).
Select the size of paper you loaded in the MP tray.
Select the size of paper you loaded in the standard paper tray.
2 Select the size of paper you loaded in the Optional Tray (Tray 2).
2 Select the size of paper you loaded in the Optional Tray (Tray 3).
2 Select the size of paper you loaded in the Optional Tray (Tray 4).
Select whether to display a message telling you that the paper tray is nearly
empty.
Select the minimum paper level that will trigger the message.
Select whether to display a message telling you to check that the size of the
paper in the machine and the machine's Paper Size setting match.
Level 4 Descriptions
- Select the LCD language for your country.
- Choose a print resolution.
- Increase or decrease the print density.
- Increase the page yield of the toner cartridge.
- Set how much time will pass before the machine enters Power
Saving Mode.
- Decrease printing noise.
Set the number of hours that the machine will remain in Deep
Sleep Mode before going into Power Off Mode.
- Adjust the beeper volume.
Backlight Adjust the brightness of the LCD backlight.
Dim Timer Set how long the LCD backlight stays on after the last finger
press.
335